All articles
3D printing materials manual for PLA, PETG, ABS, TPU, carbon fibre nylon density (g/cm³), spool weight to metres conversion, and drying temperatures.
-
ABS vs ASA for Printing: Settings, Strength and Fumes
ASA beats ABS outdoors and emits less styrene at near-identical print settings. Data-sheet numbers, starting profiles and where ABS still wins.
-
Best Filament for Outdoor Use: ASA vs PETG vs PLA
Why ASA is the default for parts that live in sunlight: published weathering data on ASA, PETG, PLA and ABS, plus print settings and a coupon test.
-
Wet Filament Symptoms and How to Fix Them: PLA, PETG and TPU
Identify moisture-related popping, stringing and pitted walls, use manufacturer drying temperatures, and verify the fix with a repeat print before tuning
-
PLA Plus vs Regular PLA Explained: What the Plus Buys
PLA+ trades stiffness and a little tensile strength for 5 to 12 times the impact toughness. Data-sheet numbers, the settings to change, and how to check.
-
Best Filament for Beginners: What to Buy First
PLA is the right first filament for nearly every FDM printer. What to buy, which diameter, how much, and the spool details that actually matter.
-
How to Dry Filament: Drying Chart by Material
Use a filament drying chart with temperatures, hours and recipe limits by material, then choose a drying method and keep the recovered spool dry.
-
PLA vs PETG vs ABS: Which Filament to Use
A spec-based comparison of PLA, PETG and ABS covering print temperatures, warping, enclosure needs, heat resistance, and what each material is for.
-
Filament Density: Convert Spool Weight to Length
How filament density converts spool weight into printable length, why net spool weight matters, and how absorbed moisture ruins otherwise good material.