Topics
Browse everything 3D Filament Guide publishes by category and tag: every topic covered here, with the most recent guides listed under each one.
Tags
Use the complete tag index to browse filament topics with at least three published guides.
- #filament 5
- #material-selection 4
- #petg 4
- #pla 4
- #comparison 3
- #filament-drying 3
- #storage 3
- #abs 2
- #asa 2
- #troubleshooting 2
- #uv-resistance 2
- #beginners 1
- #buying-guide 1
- #desiccant 1
- #enclosure 1
- #material-density 1
- #outdoor 1
- #pla-plus 1
- #print-settings 1
- #spool-weight 1
- #weathering 1
- #wet-filament 1
Categories
comparisons 3 posts
- ABS vs ASA for Printing: Settings, Strength and FumesASA beats ABS outdoors and emits less styrene at near-identical print settings. Data-sheet numbers, starting profiles and where ABS still wins.
- PLA Plus vs Regular PLA Explained: What the Plus BuysPLA+ trades stiffness and a little tensile strength for 5 to 12 times the impact toughness. Data-sheet numbers, the settings to change, and how to check.
- PLA vs PETG vs ABS: Which Filament to UseA spec-based comparison of PLA, PETG and ABS covering print temperatures, warping, enclosure needs, heat resistance, and what each material is for.